ข้ามไปที่เนื้อหาหลัก

HAND-HELD DUAL ILLUMINATION OPTICAL MICROSCOPES

       LINK   Microscopes are hand-held inspection tools that will provide years of service, true optical performance and laser safety. Their design incorporates an LED for illumination that provides 100,000 hrs. of lamp life and optimizes battery life.
       US-2853 is a dual-illumination microscope that includes both coaxial and oblique illumination . The coaxial setting is used for the highest level of image detail ; oblique  illumination shows only major defects and contaminants, which prevents over-polishing.
       Coaxial illumination, which provides the most critical view of fiber end-faces, renders scratched highly visible and is the clear choice for field termination in sensitive installations.
       In oblique illumination , the white LED light is bended to hit the core at an angle  marking any contaminantion and debris easily visible. Furthermore, faint scratches are not as easily sen this method. A technician can therefore polish to a no higher loss level without being tempted to over-polish the end-face.
       Easily chanageable adapetrs are available for any type of connector. The rubber boot provides a slip-resistant grip, while a built-in safety filter provides a high of attenuation at the most common laser wavelengths in case of accidental viewing.


POWER METER AND LIGHT SOURCE
UF-2890
Application
- Component measurements        
- Sensing Systems
- Fiber network tests
- calibration of optical receivers
- Transmission
- Material analysis

UF-2892


 Application
- Component measurements
- Sensing Systems
- Fiber network tests
- calibration of optical receivers
- Transmission
- Material analysis
UF-2894
 
 
Application
- Component measurements
- Sensing Systems
- Fiber network tests
- calibration of optical receivers
- Transmission
- Material analysis


 
 





ความคิดเห็น

โพสต์ยอดนิยมจากบล็อกนี้

10. ข้อกำหนดในการติดตั้งระบบสายสัญญาณภายหลังการติดตั้งคือสายสัญญาณ

10.1     ทั่วไป             สำหรับการติดตั้งนอกจากจะต้องดำเนินการตามมารตรฐานนี้แล้วยังต้องติดตั้งตามข้อกำหนดและระเบียบในการติดตั้งที่ถือปฎิบัติในแต่ละท้องที่อีกด้วย 10.1.1  การเดินสายสัญญาณแนวราบและสายสัญญาณหลัก             ควรจะเริ่มประเมินว่าจะติดตั้งสายสัญญาณได้ถูกต้องตามแบบที่ได้กำหนดไว้ และความเค้นในสายควรจะมีน้อยที่สุด (ความเค้นเกิดจากแรงดึงในการดึงและขึงสายสัญญาณ ในการติดดตั้งหรือการรัดสายเนื่องจากการมัดสาย) สายรัดสายสัญญาณที่ใช้รัดรวมสายสัญญาณควรจะรัดให้หลวมพอที่สายสัญญาณจะสามารถเลื่อนไปตามสายได้บ้าง ไม่ควรจะรัดจนสายเสียรูปไป (ต้องศึกษาข้อกำหนดการติดตั้งและกฎระเบียบก่อนการติดตั้ง) 10.2     สายตีเกลียว 100 โอห์ม (สายยูทีพี : สายตีเกลียวไม่มีชิลด์) หรือสายเอสซีทีพี  (สายตีเกลียวหุ้มฟอยล์) 10.2.1  รัศมีความโค้งงอที่ต่ำที่สุด             รัศมีความโค้งงอที่ต่ำที่สุดของสายสัญญาณจะขึ้นอยู่กับสภาพของสายสัญญาณขณะที่ทำการติดตั้งคือมีแรงดึงมากระทำกับสายสัญญ...

4. การติดต้้งระบบสายสัญญาณ

4.1       ทั่วไป             การติดตั้งสายสัญญาณแนวราบเป็นส่วนหนึ่งของการติดตั้งระบบสายสัญญาณที่ใช้ในการสื่่อสารคอมพิวเตอร์และโทรคมนาคม โดยเป็นการติดตั้งสายสัญญาณจากจุดรวมการสื่อสารไปยังเต้ารับ หรือขั้วต่อในพื้นที่ใช้งาน ซึ่งประกอบด้วยสายสัญญาณแนวราบ เต้ารับ การเชื่อมต่อสายเชือมต่อหรือสายต่อในจุดรวมการสื่อสาร และอาจจะถึงกลุ่มเต้ารับ หรือจุดศูนย์รวมเต้ารับก็ได้             (คำว่า "แนวราบ" ใช้กับสายสัญญาณที่เดินตามแนวราบหรือแนวนอนในขั้วหรือใต้ฝ้าของอาคาร)             การออกแบบการติดตั้งสายสัญญาณในแนวราบเทียบกับการใช้งานในระบบต่างๆ ดังนี้             ก) ระบบการสื่อสารทางโทรศัพท์             ข) อุปกรณ์ต่อเชื่อมระบบสลับสาย             ค) ระบบการสื่อสารผ่านคอมพิวเตอร์             ง) ระบบแลน (Local area Network)             จ)...

การคำนวณค่า Loss ของ Fiber Optic

ตัวอย่าง : (คำนวณที่ wavelength 1300 nm ตามมาตรฐาน TIA/EIA-568-B.3   ติดตั้งสาย Multimode 50/125 ohm ยาว 500 เมตร มีจุดต่อแบบ Splice 1 จุด ต่อ และมีจุดต่อแบบ Adapter 2 จุดต่อที่ Patch Panel ให้คำนวณหาค่า Loss                                              Limit                        Q’TY                          Loss Fiber Loss                          1.5 dB/km           ...